Kent RO in Nagpur – Ovi Kent In Nagpur
Kent RO Membrane in Nagpur
Drinking impure water has harmful effects on your health, as it acts like a slow poison, causing routine illness like Cholera, Dysentery, Diarrhea, Jaundice, Tuberculosis and even diseases like Cancer. More than 37.7 million Indians are affected by water borne diseases annually, with over 1.5 million children are estimated to die of Diarrhea alone. More than 80% of stomach diseases in India are caused by polluted water.
RO Membrane removes dissolved impurities in water such as Arsenic, Salts, Calcium, Magnesium, FLuoride, Lead, Silica, Phosphates etc. It also removes microbiologies impurities such as bacteria & Virus. It is 75GPD and the pore size is 0.0001 micron.
About This Item
- MATERIAL SAFETY: MS Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 58 standards, providing safe-clean drinking water.
- HEALTHY DRINKING: 80 GPD RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources.
- UNIVERSAL MEMBRANE SIZE: Industry-standard element size 11.75 x 1.75-inch, designed to fit in Suitable for most of the water filtration systems.
- LONG-LIFE: The membrane element, shipped dry in an original sealed package, has a life expectancy between 24 to 36 months, based on average feed water quality, temperature, and incoming water pressure.
Kent Ro Reverse Osmosis Membrane Element
Residential Reverse Osmosis (RO) systems are widely used to provide safe-to-drink water for families and light-commercial use. As the main filtration stage of the RO filtration system, Company RO membranes deliver consistent performance for all users with advanced membrane technology and automated spiral-wound fabrication.
Kent Ro 80 GPD RO membrane elements, NSF/ANSI Standard 58 certified, have a high permeated flow while keeping a 95% TDS removal rate, and stabilized salt rejection rate by 93%. It can efficiently remove contaminants like heavy metals including primary fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates, as well as organic, rubber mass, harmful minerals, and another soluble salt from water.
- Open Ro System by screwdriver
- Remove old Ro membrane from the machine
- Insert New RO Membrane
- Fix the RO Water purifier by screwdriver
- It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard.
- The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation.
- Keep elements moist at all times after initial wetting.
- To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use.
- The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.